Steering Wheel Inspection; Seat Belts; Fittings And Fasteners; Lights - Massimo ALLIGATOR 500 Owner's Manual

4. Resume the center cover and seat to their
position

Steering Wheel Inspection

Check the steering wheel for specified freeplay
and smooth operation.
1. Position the vehicle on level ground.
2. Lightly turn the steering wheel left and right.
3. There should be 0.8"-1.0" (20-25 mm)
of freeplay.
If there is excessive freeplay, strange noises, or
the steering feels rough or"catchy, "have the
steering system inspected by an authorized
service center。

Seat belts

Make sure that both seat belts are not frayed or
damaged. The seat belt must move smoothly
Pre Operation Checks
when pulled out and retract on its own when
released. The latch plate should click securely
into the buckle and release when the release
button is pushed firmly. Wash off any dirt or
mud which could affect operation. Have a
service center repair as necessary for proper
operation.

Fittings and fasteners

Always check the tightness of chassis fittings
and fasteners before a ride. Take the vehicle to
a service center or refer to the Service Manual
for correct tightening torque.

Lights

Check the headlights and tail/brake lights to
make sure they are in working condition. Repair
5-10