Brake Light Switch Adjustment; Cable Inspection And Lubrication - Massimo ALLIGATOR 500 Owner's Manual

8-35 Periodic Maintenance and Adjustment

Brake light switch adjustment

The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
1. Open the hood. (See pages 8-8 - 8-9 for
hood opening and closing procedures.)
2. Turn the adjusting nut while holding the
brake light switch in place. To make the
brake light switch in place. To make the
brake light come on earlier, turn the
adjusting nut in direction
the brake light come on later, turn the
adjusting nut in direction
1. Brake light switch.
3. Close the hood.
. To make

Cable inspection and lubrication

.
Lubricate the inner cables and the cable
ends. If the cables do not operate smoothly,
ask a service center to replace them.
2. Adjusting nut