Table of Contents
Advertisement
You need a secure enabled
codeplug to upgrade the
Secure Encryption Module in
your radio. Please
reprogram your radio with a
secure enabled codeplug
and try again. Aborting
upgrade...
Secure Encryption Module
Upgrade Failed
Other Errors
This Radio is NOT FLASH-
portable!
This Radio has an Invalid
Serial Number - Upgrade
Aborted
H-Option File Import Failure
This Radio Cannot be
FLASH Upgraded! The
Controller Board Must be
Initialized with a Proper
Serial Number. Reset the
Radio and Perform a
Standard Read.
Troubleshooting Hints
This is an error of the UCM upgrade. This mes-
sage appears if the codeplug in the radio does
not have the Secure Equipped feature enabled.
Enable Secure Equipped in the codeplug, re-
write the codeplug to the radio and then try the
upgrade again.
This is a generic error condition for UCM
upgrade failures.
Possible Corrective Actions
This error indicates that the attached radio can-
not be upgraded. Verify that correct radio is
attached.
This error indicates that the radio's serial num-
ber has incorrect nomenclature. Verify that the
serial number in the radio is of correct nomen-
clature.
This is an error having to do with the hopt.mdf
file. It is either corrupted or missing. It must be
installed in the same directory as the execut-
able files.
This error indicates that you are attempting to
upgrade a CBI radio. Read the radio (File ->
Read Device) and initialize the radio with the
proper serial number.
FLASHport User's Guide
25
Hide quick links:
Advertisement
Table of Contents
