Table of Contents
Advertisement
Geometry
1. To adjust V-Position, H-Size, H-Position and so forth, tune on RETMA Pattern.
2. To adjust Pincushion, Trapezoid and so forth, tune on Cross Hatch signal.
3. Screen Mode should be on 16:9 mode, and the Video Mode should be on Normal mode.
4. Press S6 button to adjust Geometry.
Item
V Size Max.
Over Scanning Rate: 105%
Vertical
Size
Vertical
Position
V C Linearity
Screen Image
- 12 -
Adjustmant Procedure
1) Receive NTSC RETMA signal.
2) The Screen mode should be selected on 16:9
mode
3) Adjust Vertical Size so that over scanning rate may
be 105%.
4) Check if the center circle is not only circular on 16:9
mode but also on 4:3 mode.
1) There is no need to adjust.
2) Check if the value of data is "0".
1) Receive NTSC RETMA signal.
2) The Screen mode should be selected
on 16:9 mode.
Adjust Vertical Position so that the circle of
RETMA signal may be centered in the vertical
direction.
1) Receive NTSC RETMA signal.
2) The Screen mode should be selected
on 16:9 mode.
3) When the center area of RETMA signal's circle is
C type in the vertical direction, adjust VC
Linearity so that vertical interval may be the same.
General Adjustment
Advertisement
Table of Contents
