Reverse Mode - JVC CA-D452TR Instructions Manual

Music Scan works by detecting a 4-second long blank at the beginning
of each selection, so it will not work well if your tape has • • •
• No blank at the beginning of a selection.
• Noise (often caused by much use or poor quality dubbing) which fills the blank with noise.
• Long, very soft passages or pauses in a selection. The scan will detect these as 4-second long
blanks. If this happens, just scan again until you reach the selection you want.

Reverse Mode

Use Reverse Mode to make the tape automatically reverse at the end of a side and start playing the
other side.
Each time you press REVERSE MODE, the Reverse Mode turns on and off alternately.
Reverse Mode ON
Continuous Play: With the Reverse Mode indicator on, when tape playback in the reverse (2)
direction finishes, the Unit always checks to see if a tape is in the other deck. If there is, it automati-
cally starts playing. This Continuous Play function works regardless of which deck starts first.
Reverse Mode OFF
25