Checking The Program; Changing The Program; Random Play - JVC CA-D452TR Instructions Manual

3. Press the number keys (1 to 10 and +10) to select the tracks.
The indications on the display stop flashing and remains lit.
The selected track numbers light up and the step number appears on the display.
PTY/EON
• Example: For track 5, press 5.
DISPLAY MODE
For track 15, press +10 then 5.
For track 20, press +10 then 10.
– SELECT +
For track 32, press +10 three times, then 2.
4. Repeat steps 2 to 3 to select the other tracks for the programme.
5. Press 3.
The Unit plays the tracks in the order you have programmed them.
If you try to programme a 33rd track, "FULL" will appear on the display to let you know that the
programme is full.
If you try to programme a disc tray that is empty, or a track number that does not exist on a disc (for
example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are skipped
when the programme is played.
You can skip to a particular programme step by pressing the MULTI CONTROL (4 P. DOWN or
¢ P. UP) or 4 or ¢ on the Remote Control during programme play.
To play the programmed tracks repeatedly, press REPEAT. For details, refer to "Repeating a Track or
the Discs" on page 22.
To stop playing, press 7 STOP (or 7 on the Remote Control) once.
To delete all the tracks in a programme, press 7 STOP (or 7 on the Remote Control) while the CD
Player is stopped. The programme is deleted and "PROGRAM" appears on the display.
To cancel programme play, press 7 STOP (or 7 on the Remote Control) while "PROGRAM" is
shown on the display.
Checking the Programme —————————————————
While the CD Player is stopped, use 4 or ¢ on the Remote Control to check the contents of the
programme.
Each time you press ¢, the programme contents are shown on the display in the programmed order.
Pressing 4 displays the previous step in the programme.
Changing the Programme —————————————————
Modify the contents of a programme while the CD Player is stopped.
Press CANCEL/DEMO on the Unit, the last step in the programme is deleted.
Each time you press the button, the last step listed in the programme is deleted from the programme.
To add a step to the programme, follow the procedure above (on either the Unit or the Remote Control).
The new steps are added to the end of the programme.

Random Play

The tracks of all loaded CDs will play at random.
1. Press PROGRAM/RANDOM while the
PROGRAM
/RANDOM
CD Player is stopped to change to
the Random Mode display.
Each time you press the button, play mode changes as follows:
= PROGRAM = RANDOM = No Play mode indicator (Continuous Play) = (back to the
beginning)
2. Press CD £/8.
The tracks of all the CDs are played in random order.
When all of the tracks have been played, the CD Player stops.
Note: Random Play cannot be activated with the DISC buttons and the number keys.
You can skip to the next track by pressing ¢ P. UP on the MULTI CONTROL (or ¢ on the Remote
Control) during Random Play. Each time you press the button, the next track is jumped to. (You cannot
skip to the previous tracks, nor to the beginning of the current track during Random Play.)
To continue with a different random track selection after the last track is played, press REPEAT to
select REPEAT ALL before or during Random Play.
To cancel Random Play, press 7 STOP (or 7 on the Remote Control) twice. When the RANDOM
indicator goes out, Continuous Play mode is resumed.
21