Using The Tuner - JVC 20981IEN Instructions Manual

Using the Tuner

FM
SLEEP DISPLAY
MODE
TAPE
AUX FM/AM
4
CD
REPEAT UP
UP
< PROGRAM SET
RANDOM DOWN
AHB
PRO BASS TREBLE
VOLUME
REMOTE CONTROL RM-SUXV10E
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
You can listen to FM and AM (MW/LW) stations. Stations can be
tuned in manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM (MW/LW) antennas
are correctly connected. (See page 3.)
One touch radio ––––––––––––––––––––––
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the FM/AM button.
Tuning In a Station
1 Press the FM/AM button.
The band and frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM (MW/LW).
FM/AM
FM AM
(On the Unit)
2 Select a station using one of the
following methods.
Manual Tuning
Press the 4 or ¢ button repeatedly to move from
frequency to frequency until you find the station you want.
Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
8
EN01-09.UX-V100[B]f
STANDBY
FM MODE
AUTO
PRESET
AUTO PRESET
CD
PHONES
FM/AM
¢
>
SET
CANCEL
DOWN
FM/AM
FM AM
(On the Remote Control)
OR
8
AHB
AUX
PRO
VOLUME
REC TIMER
REV
MODE CLOCK
CD
OPEN/CLOSE
TAPE FM/AM CD
FM/AM
DOWN MULTI CONTROL UP
¢
4
Band display, Frequency
display, Preset channel
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > or <
button on the Remote Control. After 1 second the display will
show the preset number's band and frequency.
Example: Press the UP button until the preset number 12
"P-12" appears.
UP DOWN
or
Presetting Stations
You can preset up to 30 FM stations and up to 15 AM (MW/LW)
stations using the Remote Control.
Note: Preset numbers may have been set to factory test
frequencies prior to shipment. This is not a malfunction.
You can preset the stations you want into memory by
following one of the presetting methods below.
Presetting stations manually ––––––––
FM/AM
or
When changing the Band
1 Select a band by pressing the FM/AM
button.
2 Press the 4 or ¢ button to tune in a
station.
3 Press the SET button.
"SET" will flash for 5 seconds.
Within 5 seconds, proceed to the next step.
When the display returns to the one set in Step 2 after
5 seconds, press the SET button again.
12/12/00, 12:34 PM
FM mode indicators
MONO STEREO
OR
(After 1 second)
UP
SET STORED
SET SET
DOWN
(Within 5 seconds)
FM = 30, AM = 15