Getting Started; Step 1: Unpack; Step 2: Prepare The Remote Control - JVC 1209YAMMDWMTS Instructions Manual

Step 1
:Unpack the package and
check the accessories.
Step 2
: Prepare the remote control.
Step 3
: Connect the FM antenna and
speakers (see page 4).
Finally plug in the AC power cord.
Now you can operate the System.

Getting Started

1
Step
After unpacking, check to make sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• Remote control (1)
• Batteries (2)
If any items are missing, consult your dealer immediately.
2
Step
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
• If the range or effectiveness of the remote control
decreases, replace both batteries.
1
2
3
: Unpack
: Prepare the Remote Control
R03(UM-4)/AAA(24F)
3