The following illustration shows how to install an adapter.
Complete the following steps to install a PCI or PCI-X adapter:
1. Review the information in "Safety" on page v and "Installation guidelines" on
2. Remove the top cover.
3. Select the slot you will use for the adapter.
4. If you are installing an adapter in PCI slot 3, 4, or 5, remove the PCI riser-card
5. Slide the expansion-slot cover out of the server or PCI riser-card assembly.
8
IBM xSeries 345 Type 8670: Installation Guide
page 5.
assembly.
PCI riser-card assembly
Retention latch
Adapter
retainer