IBM xSeries 345 Installation Manual page 10

Hide thumbs Also See for xSeries 345:
Table of Contents

Advertisement

Statement 3
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could result in
v Use of controls or adjustments or performance of procedures other than those
Statement 4
≥18 kg (39.7 lb)
CAUTION:
Use safe practices when lifting.
Statement 5
CAUTION:
The power-control button on the device and the power switch on the power supply do
not turn off the electrical current supplied to the device. The device also might have
more than one power cord. To remove all electrical current from the device, ensure
that all power cords are disconnected from the power source.
viii
IBM xSeries 345 Type 8670: Installation Guide
exposure to hazardous laser radiation. There are no serviceable parts inside the
device.
specified herein might result in hazardous radiation exposure.
Danger
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the
following. Laser radiation when open. Do not stare into the beam, do not view directly with
optical instruments, and avoid direct exposure to the beam.
≥32 kg (70.5 lb)
≥55 kg (121.2 lb)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eserver xseries 345 8670

Table of Contents