Timing Requirement - Philips 190S8FS/00 Service Manual

Pin Assignment:

3.3 Timing requirement

Factory Preset mode definition :
1. Perfect FOS (except PHASE)
2. Required timings need to be specified in User's Manual
Preset mode definition :
1. Need to support those timings.
2. Perfect FOS after auto adjustment.
User mode
1. Can save those timing that not in Preset mode and can be showed (not over scalar or Panel spec.)
2. It needs to reserve the 12 timings space in memory size.
3.3.1 Mode storing capacity
Factory preset modes : 11
Preset modes
User define modes
Note: 1. Screen displays perfect picture at 11 factory-preset modes.
2. Screen displays visible picture with OSD warning when input modes are the 45 preset modes.
Pin No. Description
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V) – Cable detect
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
while presenting all required timings.
: 45
: 12
93
HUDSON 8
93