Page 1: Table Of Contents
19" LCD Color Monitor Chassis: HUDSON 8 Service Service Service 190S8FS/00 190S8FB/00 190S8FB/27 Description Page Description Page 6.1 Main Board…….……………..….……………………21 Table Of Contents........………….1 6.2 Power Board…………………………..…………………25 Revision List..........…………….2 6.3 Key Board………...………………………………………27 Important Safety Notice………….........3 7. PCB Layout..……......……………………..28 1. Monitor Specifications……........…..4 7.1 Main Board..…….......……..…………..28...
Page 2: Revision List
HUDSON 8 Revision List Version Release Date Revision History Jul.5, 2007 Initial release, Draft Version Jul.16,2007 Add new BOM in Item 17 Nov.07, 2007 Update C907 in Item 16 Nov.25,2007 Add Philips 12NC for 715GT039 A...
Page 3: Important Safety Notice
HUDSON 8 Important Safety Notice Proper service and repair is important to the safe, reliable operation of all Philips Company Equipment. The service procedures recommended by Philips and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose.
Page 4: Monitor Specifications
HUDSON 8 1. Monitor Specifications...
Page 5 HUDSON 8...
Page 6: Lcd Monitor Description
HUDSON 8 2. LCD Monitor Description The LCD monitor will contain a main board, a power board and a key board which house the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each voltage.
Page 7: Operation Instructions
HUDSON 8 3. Operating Instructions 3.1 General Instructions Press the power button to turn the monitor on or off. The other control buttons are located at the front of the panel of the monitor. By changing these settings, the picture can be adjusted to your personal preferences. The power cord should be connected.
Page 8 HUDSON 8 Rear View...
Page 9: Adjusting The Picture
Description of the On Screen Display On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on...
Page 10 HUDSON 8 The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
Page 11: Connecting To The Pc
HUDSON 8 3.4 Connecting to the PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. 2) Connect to PC (a) Turn off your computer and unplug its power cable.
Page 12: Input/Output Specification
HUDSON 8 4. Input/Output Specification 4.1 Input Signal Connector Analog connectors Pin No. Description Pin No. Description Red video input DDC +5V Green video input Logic Ground Blue video input Ground Sense (GND) Serial data line (SDA) Cable detect (GND) H.
Page 13: Factory Preset Display Modes
HUDSON 8 4.2 Factory Preset Display Modes 4.3 Pixel Defect Policy...
Page 14 HUDSON 8...
Page 15 HUDSON 8...
Page 16: Failure Mode Of Panel
HUDSON 8 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
Page 17: Block Diagram
HUDSON 8 5. Block Diagram 5.1 Software Flow Chat...
Page 18 HUDSON 8 1) MCU initialize. 2) Is the EPROM blank? 3) Program the EPROM by default values. 4) Get the PWM value of brightness from EPROM. 5) Is the power key pressed? 6) Clear all global flags. 7) Are the AUTO and SELECT keys pressed? 8) Enter factory mode.
Page 19: Electrical Block Diagram
HUDSON 8 5.2 Electrical Block Diagram 5.2.1 Main Board Panel Interface (CN402) Scalar NT68665MFG EEPROM Keypad Interface (Include MCU, ADC, OSD) M24C16 (CN407) (U203) (U204) D-Data H sync D-Clock Crystal V sync 12.000MHZ DVI_SDA, (X201) VGA_SDA, DVI_SCL VGA SCL D-Sub Connector Connector (CN101)
Page 20 HUDSON 8 5.2.2 Inverter/Power Board AC input Bridge Rectifier Transformer Rectifier diodes EMI filter and Filter Start Circuit: R905 CN902 Feedback PWM Control IC Circuit （IC901） ON/OFF Output Transformer MOSFET Circuit ON/OFF Lamp Over Voltage Control Control IC Feedback （IC801） Circuit...
Page 21: Schematic Diagram
HUDSON 8 6. Schematic 6.1 Main Board 715G2561-1 DVI/D-SUB +5V_ESD BAV70 DVI_5V D102 FB101 DVI_VDD 120 OHM DVI_5V BAV99 BAV99 BAV99 BAV99 FB107 D103 D104 D101 D105 RX2P RX2M RX1P RX1M C102 C103 C104 C105 C106 C107 0.1uF 16V 0.1uF 16V 0.1uF 16V 0.1uF 16V R106...
Page 22 HUDSON 8 MCU+SCALER PARTS NONE OD U203 NT68665 NT68670 CN202 R209 FB202 DVI_VDD C201 F5 120OHM R228 C202 F8 ADC_VAA MCU_VDD C203 B3 R218 C204 B3 TCLK1M C212 0.1u VGA_VDD C205 B3 TCLK1P C203 Q201 C206 C3 2N3906S-RTK/PS C211 0.1u C207 C3 0.1uF 16V C208 C3...
Page 23 HUDSON 8 DC-DC U303 PANEL_VCC CN301 R302 R303 C302 C301 B7 10uF/16V C303 330 1/4W 330 1/4W 0.1uF 16V C302 A3 R305 C303 A4 10K 1/16W C304 B3 C305 B7 Q302 U301 C306 B9 R307 AO3401 C307 B8 AP1117D33LA +3.3VCC C304 51K 1/16W C308 B2...
Page 24 HUDSON 8 CONNECTOR CN402 modify +3.3VCC 1/18 TCLK1M TCLK1P CN401 B4 CN402 A4 CN403 F2 CN404 E6 CN405 F5 CN401 CN406 R407 CN407 TCLK2M KEY1_PAD KEY1 TCLK2P KEY2_PAD C401 F8 POWER C402 100R 1/16W Auto/Left/Right key C402 B7 R411 LED_G LED_O C403 C7 C404 C7...
Page 25: Power Board
HUDSON 8 6.2 Power Board 715G2594-1 POWER 1/4W R951 BD901 1/4W R952 KBP208G C920 1/4W R953 0.001uF/500V FB903 BEAD BD901 A1 CN901 E1 CN902 C8 C900 E4 D920 L921 C901 B2 C902 B2 SBT150-10LST 3.5uH F902 T901 0R05 1/4W C903 B2 C904 B8 80GL17T-33-N2 C907 B2...
Page 26 HUDSON 8 INVERTER PT801 R801 0R05 1/10W 5% POWER X'FMR CN801 +12V L801 CONN C801 R802 10pF/3KV 100R 1/8W 5% R850 R810 R805 R804 0R05 1/10W 5% 4.7K 1/10W 5% Q802 R808 Q801 1/4W PDTC144WK 10K 1/10W 1% PDTA144WK 1/4W CN802 ON/OFF R806...
Page 27: Key Board
HUDSON 8 6.3 Key Board 715G1755-2 CN101 CONN LED-G LED-O KEY2 R101 K-PWR K-PWR CN101 KEY1 100R 1/10W 5% R100 C101 KEY2 0R05 1/8W C102 add on Mar.-31-07 C103 KEY1 C104 C101 C102 C103 C104 C105 0.01uF 0.01uF 0.01uF 0.01uF 0.01uF C105 LED1...
Page 28: Pcb Layout
HUDSON 8 7. PCB Layout 7.1 Main Board 715G2561-1 C101 C215 D105 Q301 R144 R410 C102 C216 D106 Q302 R201 R411 C103 C219 D107 Q305 R202 R412 C104 C220 D108 Q402 R205 R413 C105 C222 D109 Q403 R206 R414 C106 C301 D110 Q404...
Page 29 HUDSON 8 HUDSON 8...
Page 30: Power Board
HUDSON 8 7.2 Power Board 715G2594-1 BD901 D4 J802 C801 J803 C805 J804 C811 J805 C812 J806 C900 J808 C901 J809 C902 J810 C903 J811 C907 J812 C909 J817 C910 J819 C911 J901 C920 J903 C921 J904 C922 J905 C923 J906 C924 J909...
Page 31 HUDSON 8 HUDSON 8 C802 J907 R843 C803 J908 R844 C804 Q801 R845 C806 Q802 R846 C807 Q803 R847 C808 Q804 R848 C809 Q805 R849 C810 Q806 R850 C813 Q807 R851 C814 Q808 R852 C815 Q809 R853 C816 Q810 R900 C817 Q811 R901...
Page 32: Key Board
HUDSON 8 7.3 Key Board 715G1755-2 CN101 A1 LED1 C101 C102 C103 C104 C105 R100 R101 R102 R103 R104 R105 R106 R107 R108 R109...
Page 33: Wiring Diagram
HUDSON 8 8. Wiring Diagram Lamp Wire Harness CN402 Panel Lamp Wire Harness Power Wire Harness CN801 Panel Interface CN902 CN802 CN301 CN402 Power Board Main Board CN407 CN804 CN901 CN803 CN102 CN101 D-SUB AC-IN Key Board Wire CN101 Key Board...
Page 34: Mechanical Instructions
HUDSON 8 9. Mechanical Instructions 1. Back View as Fig1 Place the monitor face down on a smooth surface as Fig 1. Be careful to avoid scratch and injury during the uninstallation. Fig1 2. Remove the cable management as Fig2. Fig2...
Page 35 HUDSON 8 3. Remove the base as Fig3~Fig4. Fig3 Fig4...
Page 36 HUDSON 8 4. Remove the stand as Fig5 and Fig6. Remove the four screws to remove the stand. Fig5 Fig6...
Page 37 HUDSON 8 5. Remove the hinge cover as Fig7~ Fig8. Fig7 Fig8...
Page 38 HUDSON 8 5. Remove the hinge as Fig9. Remove the four screws to remove the hinge as Fig9. Fig9 6. Remove rear cover as Fig10. a. Remove 3 screws to remove rear cover as Fig10. Fig10...
Page 39 HUDSON 8 b. Insert plastic putty knife into the gap between front bezel and back cover to release 3 snaps on the left, 3 snaps on the right and 5 snaps on the top as Fig11 - Fig14 Insert plastic putty knife into the gap between front bezel and...
Page 40 HUDSON 8 5 snaps on the top Fig14 7. Remove shielding as Fig15. Remove 9 screws to remove shielding as Fig15. Fig15...
Page 41 HUDSON 8 8. Remove main board and power board as Fig16. Remove 8 screws to remove main board and power board as Fig16. Fig16 9. Remove the bezel as Fig17- Fig19 a. Remove 3 screws at the bottom of the main frame as Fig17. b.
Page 42 HUDSON 8 Fig18 Fig19 10. Remove the main frame as Fig20- Fig21. a. Remove 2 screws at the right of main frame Fig20. b. Remove 2 screws at the left and 1screw at the bottom of the main frame Fig21. Fig20...
Page 43 HUDSON 8 Fig21 11. The end as Fig22. Fig22...
Page 44: Trouble Shooting
HUDSON 8 10. Trouble Shooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Page 45 HUDSON 8...
Page 46: Repair Flow Chart
HUDSON 8 11. Repair Flow Chart 11.1 Main Board (1). No Power No power Press power key and look if the picture is normal Please reinsert and make sure the AC of 100-240 is normal Reinsert or check the Adapter/Inverter section Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V...
Page 47 HUDSON 8 (2). No Picture No picture Measure U301 PIN2=3.3V Measure U304 PIN2=1.8V Replace D301, U301 or U304 X201 oscillate waveforms are normal Replace X201 Check if the sync signal from computer is output and video cable is connected normally Input the sync signal of computer, or change the cable...
Page 48 HUDSON 8 (3). White screen White screen Measure Q301 base X201 oscillate is high level? waveform is normal Replace X201 Check Q301, Q302 is broken or CN402 solder? Check reset circuit of U203 is normal Check Correspondent Check Correspondent component. component.
Page 49 HUDSON 8 11.2. Power/Inverter Board (1) No power Check CN902 pin4, 5 = 12V Check AC line volt 110V or 220V Check AC input Check the voltage of C907 (+) Check bridge rectified circuit and F901 circuit Check start voltage for the pin8 of IC901 Check R905 and Change IC901 Check the auxiliary voltage is bigger than 10V and smaller than 20V...
Page 50 HUDSON 8 (2) W / LED, No Backlight Check CN902 pin4, 5 = 12V Check adapter or MB Check ON/OFF signal Check Interface board Check IC801 PIN12=12V Change Q801 Check IC801 PIN10, 9 have the output of square wave at short time Change IC801 Check Q804, Q809 PIN5, 6, 7, 8 have the output of square wave at short time.
Page 51 HUDSON 8 11.3 Key Board OSD is unstable or not working Is Key Pad Board connecting normally? Connect Key Pad Board Is Button Switch normally? Replace Button Switch Replace Key Pad Board Is Key Pad Board normally? Check Main Board...
Page 52: Isp Instruction
HUDSON 8 12. ISP Instruction (1). Install the program software First decompressing files , as follow:...
Page 53 HUDSON 8 b. Double – click , start to install as follows:...
Page 54 HUDSON 8...
Page 55 HUDSON 8...
Page 56 HUDSON 8 c. There will be a shortcut key appears on the desktop. (2). Connect the ISP board as follow: Connect to the Connect to Philips 190S8 the PC LPT a. Double-click ，running the program as follows:...
Page 57 HUDSON 8 b. Click icon, search the program” PHILIPS_190S_HSD_HSD190MEN3_V0.29.hex”, and click open:...
Page 58 HUDSON 8 c. Click icon, the writer is in processing… d. Until appears the follow Fig, writer completed.
Page 59: Ddc Instruction
HUDSON 8 13. DDC Instruction General DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect, repaired monitor’ the serial numbers have to be re-programmed. It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed.
Page 60 HUDSON 8...
Page 61 HUDSON 8...
Page 62 HUDSON 8...
Page 63 HUDSON 8 Click to complete the installation. Note: After installation, you must restart the PC to take the setup to effect.
Page 64 HUDSON 8 2. Install the “WinDDC_ setup” Second, you must install the . The processing as follows:...
Page 65 HUDSON 8...
Page 66 3. Connect the DDC board as follow: Connect to the PC LPT When you write analog EDID, Connect this port to the Philips 190S8’s VGA port When you write digital EDID, Connect this port to the Philips 190S8’s DVI port 12V Input...
Page 67 HUDSON 8 4. Take analog DDC write for example, as follow a. Double-click ，appear as follow Figs：...
Page 68 HUDSON 8 b. Click c. Key 14 numbers in the Serial Number blank, then click “OK”. Now analog DDC Write completes, as follow. Note: The way of digital DDC write is the same as analog DDC write.
Page 69 HUDSON 8 190S8 EDID Analog 128 bytes EDID Data (Hex): 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00 FF FF FF FF FF FF 00 41 0C 59 08 01 01 01 01 16: 0C 0D 01 03 0E 26 1E 78 EE A1 50 A3 57 4C 9D 25 32: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 70 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '213231232132' Detailed Timing: FC (Monitor Name) 'Philips 190S' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 71 HUDSON 8 190S8 EDID Digital 128 bytes EDID Data (Hex): 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 00 FF FF FF FF FF FF 00 41 0C 59 08 01 01 01 01 16: 15 0D 01 03 80 26 1E 78 EE A1 50 A3 57 4C 9D 25 32: 11 50 54 BF EF 80 71 4F 81 40 81 80 01 01 01 01 48: 01 01 01 01 01 01 30 2A 00 98 51 00 2A 40 30 70...
Page 72 Detailed Timing: 1280x1024 @ 60Hz. <-x-Detailed Timing Descriptions-x-> <---Detailed Timing Descriptions---> Detailed Timing: FF (Monitor SN) '132232131233' Detailed Timing: FC (Monitor Name) 'Philips 190S' Detailed Timing: FD (Monitor limits) Min. V. rate: 56Hz Max. V. rate: 76Hz Min. H. rate: 30KHz Max.
Page 73: White Balance, Luminance Adjustment
HUDSON 8 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (FGAWB0.15SN), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing.
Page 74 HUDSON 8 4. Color Temp confirmation Connect the signal to the monitor, the monitor display white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
Page 75: Monitor Exploded View
HUDSON 8 15. Monitor Exploded View...
Page 76: Recommended & Spare Parts List
HUDSON 8 16. Recommended & Spare Parts List Recommended Parts List 190S8FS/00 Item Location Part No. Description Philips 12NC FQ003 P34G1829 VOD1T BEZEL L19-7phb1-S3 FQ004 P34G1830 VB 1T REAR COVER FQ002 P33G4975 VPB1C BUTTON_OSD FQ001 705GQ734241 STAND/BASE ASS'Y 190S_VB E750L...
Page 77 HUDSON 8 Spare Parts List Service Kit Description Part No. Philips 12NC Remark DDC Kit 715L2005C2 9965 000 43197 for all model OSD SN Kit 715GT033 C 9965 000 43252 for all model for all hudson 7 NOVATEK ISP Kit...
Page 78 HUDSON 8 Accessory and Mechanical Location Part No. Description Philips 12NC E089A 089G 728HAA 21 SIGNAL CABLE E089C 089G179E30H712 FFC CABLE E089B 089G404A18N YH POWER CABLE E095A 095G8014 7D514 WIRE HARNESS FQ001 705GQ734241 STAND/BASE ASS'Y 190S_VB E750L 750GLG90E8L12M000F PANEL LM190E08-TLL1 NJ PHP LPL...
Page 79 HUDSON 8 Board Parts Location Part No. Description Philips 12NC FQ012 CBPC7HNAPHQA3 MAIN BOARD(HSD) FQ013 CBPC7GNAPHQA9 MAIN BOARD (LG) C302 067G305V100 3 105℃ 10UF +-20% 16V C315 067G305V101 3 105℃ 100UF M 16V C310 067G305V101 3 105℃ 100UF M 16V...
Page 80 HUDSON 8 R305 061G0402103 RST CHIPR 10 KOHM +-5% 1/16W R415 061G0402103 RST CHIPR 10 KOHM +-5% 1/16W R417 061G0402103 RST CHIPR 10 KOHM +-5% 1/16W R201 061G0402105 RST CHIPR 1MOHM +-5% 1/16W R129 061G0402151 RST CHIP 150R 1/16W 5% R133 061G0402151 RST CHIP 150R 1/16W 5%...
Page 81 HUDSON 8 C111 065G0402104 12 CHIP 0.1UF 50V X7R C112 065G0402104 12 CHIP 0.1UF 50V X7R C113 065G0402104 12 CHIP 0.1UF 50V X7R C114 065G0402104 12 CHIP 0.1UF 50V X7R C116 065G0402104 12 CHIP 0.1UF 50V X7R C117 065G0402104 12 CHIP 0.1UF 50V X7R C118 065G0402104 12...
Page 82 HUDSON 8 ZD104 093G 39S 24 T RLZ 5.6B LLDS ZD103 093G 39S 24 T RLZ 5.6B LLDS ZD102 093G 39S 24 T RLZ 5.6B LLDS ZD101 093G 39S 24 T RLZ 5.6B LLDS D301 093G3004 3 SM340A U203 705GQ756019 MCU ASS'Y （LG）...
Page 83 HUDSON 8 C807 065G 3J5096ET 5PF 5% SL 3KV C808 065G 3J5096ET 5PF 5% SL 3KV C901 065G305M1022BP Y2 1000PF M 250VAC Y5P C900 065G305M1022BP Y2 1000PF M 250VAC Y5P C912 065G305M2222BP 2200PF +-20% C936 067G215D222 2K 105℃ 2200UF M 10V C936 067G215D2222KV 105℃...
Page 84 HUDSON 8 Q821 057G 600 55 P5506 HVG SO-8 Q886 057G 759 2 RK7002 Q885 057G 759 2 RK7002 Q883 057G 759 2 RK7002 Q881 057G 759 2 RK7002 Q880 057G 759 2 RK7002 Q871 057G 759 2 RK7002 Q801 057G 759 2 RK7002 Q873...
Page 85 HUDSON 8 R944 061L0805910 1F CHIP 9.1K OHM 1/10W 1% R945 061L0805910 1F CHIP 9.1K OHM 1/10W 1% R918 061L1206000 CHIPR 0 OHM +-5% 1/8W R926 061L1206000 CHIPR 0 OHM +-5% 1/8W R907 061L1206103 CHIP 10KOHM 5% 1/4W R910 061L1206155 1.5M/0805 R904 061L1206155...
Page 86 HUDSON 8 C917 065G0805334 22 0.33UF+-10% 25V X7R 0805 C858 065G0805391 31 CHIP 390PF 50V C813 065G0805561 31 CHIP 560PF 50V NPO 0805 C941 065G0805562 21 5600PF/25V/NPO/J D831 093G 64 33 DIO SIG SM BAV99 (PHSE)R D851 093G 64 33 DIO SIG SM BAV99 (PHSE)R D833 093G 64 42 PP...
Page 87: Different Parts List
HUDSON 8 17. Different Parts List Diversity of 190S8FB/00 compared with 190S8FS/00 190S8FB/00 190S8FS/00 Location Part No. Description Part No. Description FQ002 P33G4975 VQB1C BUTTON_OSD P33G4975 VPB1C BUTTON_OSD FQ003 P34G1829 VBE1T BEZEL L19-7phb1-S3 P34G1829 VOD1T BEZEL L19-7phb1-S3 Diversity of 190S8FB/27 compared with 190S8FS/00...
Page 88: General Product Specification
MECHANICAL CHARACTERISTICS 5.1 COSMETIC PHILIPS ID 5.2 MECHANICAL DATA FILES PROE FILES REQUIRED 5.3 LOCATION OF PHILIPS LOGO PER PHILIPS MAKE-UP SHEET 5.4 GAP BETWEEN PANEL AND FRONT BEZEL <0.8 (TYP) MM 5.5 LOCATION OF CONTROL ICONS PER PHILIPS GRAPHIC SHEET 5.6 COLOR FOR RESIN/PAINT...
Page 89 6.3 DISPLAY DISTURBANCES FROM EXTERNAL ENVIRONMENT 6.4 DISPLAY DISTURBANCES TO EXTERNAL ENVIRONMENT RELIABILITY 7.1 MEAN TIME BETWEEN FAILURES QUALITY ASSURANCE REQUIREMENTS 8.1 ACCEPTANCE TEST PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY REGULATORY COMPLIANCE 10.1 WORLDWIDE REGULATORY 10.2 EMC REQUIREMENTS 10.3 ROHS 10.4 WEEE...
Page 90: Foreword
30 minutes that brightness stability is optimal, and follow strictly after panel specification. 2. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated tilt base. 2.1 LCD Priority : 1.
Page 91: Scanning Frequencies
HUDSON 8 White luminance : 300 nits (typ) Color gamut : 72% (typ) Gate IC Source IC Response time : 5ms 2.2 Scanning frequencies Hor. : 30 – 83 K Hz Ver.: 56 - 76 Hz Video dot rate: 165 MHz Power input: 90-264 V AC, 50/60 ±...
Page 92 HUDSON 8 Pin assignment: Pin No. Signal Green/ SOG Blue Sense (GND) Cable Detect (GND) Red GND Green GND Blue GND DDC +3.3V or +5V Logic GND Sense (GND) Bi-directional data H/H+V sync V-sync Data clock 3.2.2 DVI Cable The input signals are applied to the display through DVI-D cable. Length.
Page 93: Timing Requirement
HUDSON 8 Pin Assignment: Pin No. Description T.M.D.S. data2- T.M.D.S. data2+ T.M.D.S. data2 shield No Connect No Connect DDC clock DDC data No Connect T.M.D.S. data1- T.M.D.S. data1+ T.M.D.S. data1 shield No Connect No Connect +5V Power Ground (for +5V) – Cable detect Hot plug detect T.M.D.S.
Page 94 HUDSON 8 3.3.2 Factory preset modes (11 modes) Factory modes and preset modes are defined in the enclosed timing table file. Item H.Freq. (KHz) Mode Resolution V.Freq. (Hz) BW(MHz) 31.469 IBM VGA 10H 640x350 70.086 25.175 31.469 IBM VGA 3H 720x400 70.087 28.322...
Page 95 Yes: Auto adjustment for displaying timing mode and recall factory preset OSD Languages –8 Power On Logo: Power On show up Philips logo 3 second change to input signal This picture is reference only. The official drawing will send out by PM.
Page 96: Horizontal Scanning
HUDSON 8 OSD Tree 3.4 Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 – 83 K Hz 3.5 Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz...
Page 97: Power Input Connection
Tune at least. 3.12 EDID Data for EDID & .inf file 1 User visible strings on .inf file Philips 190S (19inch LCD MONITOR 190S8) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes MSB(byte 12): 08 LSB (byte 11): 59...
Page 98: Smart Image
HUDSON 8 3.14 Smart contrast (Dynamic contrast ratio) Smart Contrast is a kind of dynamic backlight control. This function changes the panel backlight dynamically according to the frame brightness histogram. the contrast ratio has to be 3000:1(typical). 3.15 Smart Image 3.15.1Smart Image OSD outlook (Economic Economy) 3.15.2Smart Image OSD outlook...
Page 99 HUDSON 8 Brightness Contrast iii. Color Temperature B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is the value of that in preset profile by open the main OSD. C. When any SmartImage Lite profile had been enabled. The parameters in main OSD are still available for user to adjust.
Page 100: Visual Characteristics (Dynamic Contrast Ratio)
HUDSON 8 ii.No optimization by Smart Image. iii.Design: 1. Brightness level set to 70%, a little higher brightness level than laptop PC, fine tune brightness level before DVT exit. 2. Color temperature set to 6500K. 3. Gamma Table is turn on. E.
Page 101: Check Cross Talk (S)
HUDSON 8 B_min X 100% >75% B_max Where B_max =Maximum brightness, B_min = Minimum brightness 4.5 Check Cross talk (S) Apply Pattern 2. Set contrast and brightness at 100 %. Measure YA. Then output Pattern 3 and measure YB. the cross talk value : ABS ( YA - YB ) ⎯⎯⎯⎯⎯⎯⎯⎯⎯...
Page 102: Mechanical Characteristics
5.1 Cosmetic - Philips ID 5.2 Mechanical data files - ProE files required 5.3 Location of Philips logo - Per Philips make-up sheet 5.4 Gap between panel and front bezel < 0.8 (typ) mm 5.5 Location of Control icons - Per Philips Graphic sheet 5.6 Color for resin/paint -...
Page 103: Plastics Flammability
(bezel, back cover, base). Plastic resin type selection should be referred to “TY R83-2-9002-1”s. 5.11 Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet. The exterior surfaces shall have a uniform texture. Philips must approve the mold texturing.
Page 104: Product Dimension/Weight (Prefer To Sht 191)
HUDSON 8 5.15 Product dimension / Weight (Refer to SHT 191 ) Unit dimension : 424.05mm (W) * 418.8 (H) * 210.82mm(D) Packed unit dimension : ???mm(W) * ???mm(H) * ??? mm(D) for WW : 492mm(W) * 456mm(H) * 175 mm(D) for China Net weight ?Kg (Including I/F cable ? g) Gross weight...
Page 105: Pallet/Container Loading
HUDSON 8 5.17 Pallet / Container loading Transportation standards refer to TYE-M0002. Air shipment - Sea container 20'(pallet/slip sheet) Sea container 40'(pallet/slip sheet) Sea container 40' High Cube (pallet/slip sheet) Truck shipment- Transportation request for all region except China/India A. Air shipment B.
Page 106: Acceptance Test
Control II level AQL: 0.4 (major) 1.5 (minor) (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 9. Philips’ Flat Panel Monitors Pixel Defect Policy Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL...
Page 107 HUDSON 8 Fig 1: Measurement locations of Brightness Uniformity Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black)
Page 108 HUDSON 8 SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1...
Page 109: Regulatory Compliance
HUDSON 8 10. REGULATORY COMPLIANCE 10.1 Worldwide Regulatory Domain Safety / EMC / Ergonomics / Standards Documents Country CB Report IEC60950-1:2001. Group -and national differences International and CB of all countries listed in CB Bulletin No. 107A certificate European Low Voltage Directives 73/23/EEC and Declaration of 93/68/EEC Conformity...
Page 110 HUDSON 8 Certificate of South Africa SABS IEC 60950 Conformity UL 60950-1: 2003 UL certificate FCC Part 15 Class B FCC ID grant Energy Star registration CSA C22.2 No 60950 CSA certificate Canada Statement on ICES-003 issue 3 label Mexico NOM-019-SCFI-1994 certificate Korean Safety Control law IEC 60950...
Page 111: Emc Requirements
10.2 EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. 10.3 RoHS Restriction on the use of certain hazardous substances.
Page 112 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the manufacturer's approved type.

This manual is also suitable for:

190s8fb/00 190s8fb/27

Philips 190S8FS/00 Service Manual

Service Service Service

88 18. General Product Specification

Quick Links

Chapters

Related Manuals for Philips 190S8FS/00

Summary of Contents for Philips 190S8FS/00

This manual is also suitable for:

Table of Contents