Manual Number Dialing (Memory Transmission) - Panasonic Panafax UF-744 User Manual

Manual Number Dialing (Memory Transmission)

To dial the telephone number manually using the keypad, follow the steps below.
1
2
MEMORY
Make sure that the MEMORY lamp is on.
If not, press MEMORY to set "On".
3
Enter a telephone number from the keypad.
Ex: 5 5 5 1 2 3 4
4
START
The document is stored into memory with a file number.
Then starts to dial the telephone number.
Note:
1. If you need a special access number to get an outside line, dial it first then press
pause (represented by a "–") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex : 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP?
1:YES 2:NO
1
Press to stop the transmission. The document you stored will be erased automatically.
If you do not want to erase the documents, change the setting of Fax Parameter No. 31 (INC. FILE SAVE)
to Valid in advance.(see page 36)
Set document(s) face down.
(represented by a "/").
STOP
Sending Documents
.
DOCUMENT SETAAAAAAAA
ENTER STATION(S) 00%
TEL.NO.
5551234
* STORE * NO.002
PAGES=01 05%
* STORE * COMPLETED
TOTAL PAGES=05 25%
* DIALING *
5551234
PAUSE
to enter a
4
45