Fax Access Code
The Fax Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Fax Access
Code is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Fax Access Code does not affect the use of the machine in any other way.
Setting the Fax Access Code
1
FUNCTION
2
4
3
3
4
Enter a 4-digit Fax Access Code.
Ex: 1 2 3 4
5
SET
Note:
To erase the Fax Access Code, enter the Access Code and press
above to step 3, then press
Operating Your Machine with the Fax Access Code
1
Enter the Fax Access Code.
Ex: 1 2 3 4
2
SET
Now you can operate the machine using normal
procedures.
82
7
SET
SET
8
STOP
CLEAR
SET
SET MODE
ENTER NO. OR
FAX PARAMETER(01–64)
38 FAX ACCESS CODE
38 FAX ACCESS CODE
SET
and follow the procedure
STOP
and
.
AUG–12–1995 15:00
ACCESS CODE=
AUG–12–1995 15:00
ACCESS CODE=
AUG–12–1995 15:00
(1–6)
NO.=
1234
00%