Redialing; Automatic Redialing; Manual Redialing - Panasonic Panafax UF-744 User Manual

Sending Documents

Redialing

Automatic Redialing

If the line is busy or there is no answer, your machine will redial the
number up to 5 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
If the line is still busy after the last try, a message will appear as
shown to the right and your machine will print out a COMM.
Journal depending on the setting of Fax Parameter No. 12.
When transmitting from memory and there is no answer after the last try, the stored document will be
automatically erased . If you wish to retain the document in memory even if the transmission failed, change
the setting of Fax Parameter No. 31 (INC. FILE SAVE) to Valid (see page 36). To retry an incomplete
document see page 81.

Manual Redialing

You can also redial the last dialed number manually by pressing REDIAL key.
To redial the last dialed number through memory
1
Make sure that the MEMORY lamp is on.
2
PAUSE/REDIAL
3
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
1
2
TEL/DIAL
3
PAUSE/REDIAL
Your machine starts to dial the last dialed number.
58
Set document(s) face down.
START
Set document(s) face down.
WAITING TO DIAL
(Telephone number)
INCOMPLETE
INFO. CODE=630
DOCUMENT SETAAAAAAAA
ENTER STATION(S) 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=01 01%
* DIALING *
* DIALING *
5551234