Disassembly - Pioneer BDP-05FD Service Manual

1

7. DISASSEMBLY

A
Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Diagnosis of PCB's
1 Bonnet Case S and Tray Panel
Bonnet case S
1
Remove the eight screws.
2
Remove the bonnet case S.
B
Tray panel
1 Press the u STANDBY/ON button to turn on the power.
2 Press the h OPEN/CLOSE button to open the tray.
3
Remove the tray panel.
4 Press the h OPEN/CLOSE button to close the tray.
5 Press the u STANDBY/ON button to turn off the power.
C
D
How to open the tray when the power cannot be turned on
When the tray cannot be opened because the power cannot be turned on, it can be opened using the emergency disc ejection rod
(GGF1529). (A long, thin rod about 1 mm in diameter can be used in place of the rod.)
E
Emergency disc ejection rod
(GGF1529)
F
44
1
2
DRIVE Assy BDV-103
BDP-05FD
2
3
1 5
3
2
2
Tray
4
Tray panel
3
4
4
Tray
4