AgaMatrix Jazz Owner's Manual page 15

IMPORTANT:
[1] Remove the test strip from the blood sample as soon as
you hear the beep.
[2] Do not press the AgaMatrix Jazz Test Strip against the
test site.
[3] Do not scrape blood onto the AgaMatrix Jazz Test Strip.
[4] Do not apply blood to the top side of the AgaMatrix Jazz
Test Strip.
[5] Do not apply blood to the AgaMatrix Jazz Test Strip
when the test strip is out of the meter.
[6] Do not put blood or foreign objects into the AgaMatrix
Jazz test strip port. Doing so may lead to system failure.
[7] Do not apply more blood after beep.
[8] Carefully read the test results
on the display before making any
treatment decisions.
Remove Test Strip from Blood Sample
when you hear the beep: Your meter
will beep once, when you should
remove the tip of the AgaMatrix Jazz
Test Strip from the blood sample.
On the meter display, the droplet symbol
fills. The scrolling bar and 1-2-3 indicates
that the meter is calculating your results.
26
Droplet
Symbol:
Your test is completed when your blood
glucose test result with time and date is
shown on the display. If the volume is ON,
you will hear a beep. Your test result is now
stored in the memory.
[5] Test Result Mealtime Tagging and
Feedback
If the Mealtime Tag Feature is Enabled: The AgaMatrix Jazz
Meter allows you to add a tag to your test result. Tagging
results allows you to view averages before and after meals to
see what effect food has on your blood glucose levels.
After your result appears, a tag will flash on the display
suggesting a mealtime tag (Breakfast, Post Breakfast, Lunch,
Post Lunch, Dinner, Post Dinner, and Night). For example, if you
test at 12:30 PM, the meter will flash the word "POST LUNCH."
If the tag is incorrect, you can change it by
pressing the DOWN ( ) or UP ( )
arrow buttons. Pressing the UP ( ) arrow
button would change the tag to Lunch,
pressing the DOWN ( ) arrow button
would change the tag to Dinner. Pressing
the CHECK ( ) button confirms the
mealtime tag and it stops flashing. Your
test result's mealtime tag is now stored
in the memory. You can still change this
setting by pressing the DOWN
( ) or UP ( ) arrow buttons, if you
Example of
Mealtime Tag:
POST LUNCH
27