Product Overview; Operation; Freewheeling Or Using The Self-Propel Drive - Toro PowerMax 826 O Operator's Manual

Product Overview

g018609
Figure 15
1. Hand-grip (2)
2. Auger/impeller lever
3. Speed selector lever
4. Quick Stick™ discharge
chute control
5. Traction lever
6. Fuel tank cap
7. Engine oil fill tube/dipstick 15. Snow cleanout tool
8. Chute deflector
Figure 16
1. Choke
2. Ignition switch
3. Fuel shutoff valve
4. Throttle
9. Discharge chute
10. Scraper
11. Auger
12. Skid (2)
13. Electric starter button (only
38629)
14. Electric starter plug (only
38629)
5. Recoil starter
6. Oil drain plug
7. Primer
1. Snow cleanout tool (attached to the handle)

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Freewheeling or Using the
Self-propel Drive
To disengage the self-propel drive (freewheel) when storing
the snowthrower, slide the wheels inward and insert the axle
pins through the outer axle holes, but not through the wheel
hubs (Figure 18).
To engage the self-propel drive for operating the snowthrower,
slide the wheels outward and insert the axle pins through the
holes in the wheel hubs and the inner axle holes (Figure 19).
12
Figure 17
Figure 18
Figure 19