Asus ESC4000 G3 Series User Manual page 59

For Nvidia 300W or above GPU cards, connect a GPU power cable to the conenctor on
the dongle.
air duct
8. Get the bracket and place it on a flat and stable surface.
9. Remove the screws on the metal covers (A) then remove the metal covers (B).
10. Insert the GPU cables into the opening on the bracket.
11. Align and insert the golden fingers of the accelerator into the card slot on the bracket.
Ensure the card is completely seated on the slot.
12. Secure the rear end of the accelerator to the bracket with two screws.
13. Secure the air duct and accelerator assembly with a screw.
opening on the bracket
ASUS ESC4000 G3/G3S Series
Nvidia 300W GPU card
dongle
GPU power cable
2-31