Memory Topology - Asus ESC4000 G3 Series User Manual

2u rackmount server
Table of Contents

Advertisement

C/A Parity Enable [Auto]
Allows you to enable or disable the DDR4's command address parity.
Configuration options: [Auto] [Disabled] [Enabled]

Memory Topology

Displays memory topology with DIMM population information.
Memory Thermal
Allows you to configure thermal settings.
Set Throttling Mode [Disabled]
Configuration options: [Disabled] [OLTT] [CLTT]
OLLT Peak BW [xxx]
Allows you to set the peak allowed bandwidth for OLTT. This is in percentage and valid
offset values is from 25-100.
DIMM Temp Stat [xx]
Allows you to select DIMMTEMPSTAT as temp_mid or tem_hi.
Memory Power Savings Mode [Auto]
Allows you to configure the CKE and other related Memory Power Savings features.
Configuration options: [Auto] [Disabled] [APD On] [User Defined] [Reserved]
Memory Power Savings Advanced Options
MDLL Off [Auto]
Allows you to shutdown MDLL during SR when enabled.
Configuration options: [Auto] [Disabled] [Enabled]
MEMHOT Throttling Mode [Input-only]
Allows you to shutdown MDLL during SR when enabled.
Configuration options: [Disabled] [Input-only] [Output-only]
Mem Electrical Throttling [Disabled]
Allows you to configure Memory Electical throttling.
Configuration options: [Disabled] [Enabled] [Auto]
Memory Map
Channel Interleaving [Auto]
Select different channel interleaving setting.
Configuration options: [Auto] [1-way Interleave] [2-way Interleave] [3-way Interleave]
[4-way Interleave]
Rank Interleaving [Auto]
Select different rank interleaving setting.
Configuration options: [Auto] [1-way Interleave] [2-way Interleave] [4-way Interleave]
[8-way Interleave]
5-32
CK in SR [Auto]
Configuration options: [Auto] [Driven] [Tri-State] [Pulled Low] [Pulled High]
Chapter 5: BIOS setup

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esc4000 g3s series

Table of Contents