Common Refcode Configuration; Qpi Configuration - Asus ESC4000 G3 Series User Manual

5.5.3

Common RefCode Configuration

Numa [Enabled]
This item enables or disables the Non uniform Memory Access (NUMA).
Configuration options: [Disabled] [Enabled]
5.5.4

QPI Configuration

QPI General Configuration
QPI Status
This item displays information about the QPI status.
Link Speed Mode [Fast]
This item allows you to select the QPI link speed as either the fast mode or slow mode.
Configuration options: [Slow] [Fast]
Link Frequency Select [Auto]
This item allows for selecting the QPI link frequency
Configuration options: [Auto] [6.4 GT/s] [8.0 GT/s] [9.6 GT/s]
Link L0p/L1 Enable [Enable]
This item allows you to disable or enable Link L0p or Link L1.
Configuration options: [Disable] [Enable]
COD Enable [Auto]
This item allows you to disable or enable cluste on Die.
Configuration options: [Auto] [Disable] [Enable]
Early Snoop [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Chapter 5: BIOS setup
5-30