19. Set up and program the items required for fax communications as shown
below. If the user function keys (F1, F2, F3, F4, and F5) need to be
programmed, affix the blank labels above the proper keys.
The default settings of the user function keys are as follows:
• F1: Start Manual Rx
• F2: TEL Mode
• F3: Tx File Status
• F4: Not programmed
• F5: Not programmed
NOTE: Be sure to set the clock (date and time).
20. Program the serial number into the fax unit (service function 10). The serial
number can be found on the serial number label (attached to the machine in
step 13).
SM
INSTALLATION PROCEDURE
3-5
A874