Basic Settings; Adjusting The Front Speaker Output Balance; Listening At Low Volume (Loudness) - JVC RX-730R Instructions Manual

Basic Settings

Adjusting the Front Speaker Output Balance

SETTING
Front panel

Listening at Low Volume (Loudness)

SETTING
Front panel
Page 15
Some of the following settings are required after connecting and positioning your speakers in your listening
room, while others will make operations easier.
If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output
balance.
On the front panel:
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for adjusting the balance.
The lamp next to the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "BALANCE" appears on the display.
3. Press Control @ @ @ @ @ / # # # # # to adjust the balance.
• Pressing Control @ decreases the right channel output.
• Pressing Control # decreases the left channel output.
From the remote control:
Press BALANCE L/R (–/+).
• Pressing BALANCE L (–) decreases the right channel output.
• Pressing BALANCE R (+) decreases the left channel output.
L BALANCE
Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function
automatically boosts the bass level as you lower the volume.
Note:
The loudness function affects the front speaker sounds only.
On the front panel only:
1. Press SETTING so that the Control % % % % % / fi fi fi fi fi / @ @ @ @ @ / # # # # # buttons work for setting the loudness
function.
The lamp next to the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until "LOUDNESS" appears on the display.
3. Press Control @ @ @ @ @ / # # # # # to set the loudness function to "ON" or "OFF."
• Select "ON " to activate the loudness function.
The LOUDNESS indicator lights up on the display.
• Select "OFF" to cancel it.
The indicator goes off.
R
See also
page 37.
MENU
See also
page 38.
MENU