Getting Started; Acknowledge The Crossover Type And Cancel The Demonstration; Set The Clock And Date; Set The Basic Settings - JVC KD-X282DBT Instruction Manual

Getting Started

1
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], see page 6), the display shows: "2-WAY X'OVER" or "3-WAY X'OVER"
"PRESS" "VOLUME KNOB"
1
Press the volume knob to acknowledge the current crossover type.
Then, the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB".
• To change the crossover type, see page 22.
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press and hold .
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
"TO CONFIRM".
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day" "Month" "Year".
9
Press to exit.
To return to the previous setting item, press
3

Set the basic settings

1
Press and hold .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
[SYSTEM]
[KEY BEEP] (Not applicable when 3-way crossover is selected.) (Page 22)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[AM SRC]*1 [ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 9)
[BT AUDIO SRC]*1 (For KD-X282DBT)
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables.
(Page 19)
[BUILT-IN AUX]*1 [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 12)
*1: (see page 6)
.
.
Default: [XX]
5
ENGLISH