Operating Video Components - JVC RX-7012VSL Instructions Manual

Operating Video Components

IMPORTANT:
To operate JVC's video components using this remote control:
• You need to connect JVC video components through the AV
COMPU LINK terminals (see page 29) in addition to the
connections using cables with RCA pin plugs (see pages 6 and 7).
• Some JVC VCRs can accept two types of the control signals —
remote code "A" and "B." Before using this remote control, make
sure that the remote control code of the VCR connected to the
VCR jacks is set to code "A."
• When using the remote control:
– For the DVD player, TV, and VCR operations, aim the remote
control directly at the remote sensor on each component, not on
the receiver.
– For the TV having the AV COMPU LINK EX terminal, aim the
remote control directly at the remote sensor on the TV.
CATV/DBS
DVD
TV/DBS
BASS
SURROUND
ON/OFF
BASS BOOST EFFECT
SOUND
MUTING
CA TV/DBS
CONTROL CONTROL
TV/VIDEO
TUNING
REC
PAUSE
A/V CONTROL RECEIVER
33
VCR TV AUDIO
DVD MUILTI CD
FM/AM
VCR TAPE/CDR PHONO
TREBLE
DSP ANALOG/DIGITAL SLEEP
MODE INPUT
– CENTER +
1 2 3
MENU
TEST – REAR • L +
4 5 6
ENTER
– REAR • R +
7/P 8 9
– SUB WOOFER +
0
10 +10
100 +
RETURN FM MODE
CH TV VOL VOLUME
PLAY
/REW FF/
PAUSE
STOP CONTROL
RM-SRX7012U
VCR
You can always perform the following operations:
VCR : Turns on or off the VCR.
After pressing VCR (or CONTROL repeatedly until "VCR" appears
on the display window), you can perform the following operations
on the VCR:
1 – 9, 0: Selects the TV channels on VCR.
PLAY3:
Starts playing.
REW:
Rewinds a tape.
FF: Fast winds a tape.
STOP7:
Stops operations.
PAUSE8:
Pauses playing. To release it, press PLAY3.
REC PAUSE: Starts recording or enters recording pause.
CH +/–:
Changes the TV channels on the VCR.
Note:
You can use either VCR button or CONTROL button to activate the
buttons listed above. If you press VCR, the playing source also
changes. On the other hand, if you press CONTROL repeatedly to
select "VCR," the playing source does not change.
DVD player
After pressing DVD or DVD MULTI, you can perform the following
operations on a DVD player:
PLAY3: Starts playing.
4 4 4 : 4 4
Returns to the beginning of the current (or previous)
track.
¢ ¢ ¢ ¢ : ¢
Skips to the beginning of the next track.
STOP7:
Stops playing.
PAUSE8:
Stops playing temporarily. To release it, press
PLAY3.
After pressing DVD or DVD
MULTI, these buttons can be used
for the DVD menu operations.
Note:
For detailed menu operations, refer to the
instructions supplied with the discs or the
DVD player.
TV
You can always perform the following operations:
TV
: Turns on or off the TV.
TV VOL +/–: Adjusts the volume.
TV/VIDEO:
Sets the input mode (either TV or VIDEO).
After pressing TV/DBS, you can perform the following operations
on a TV:
CH +/–: Changes the channels.
1 – 9, 0, 100+: Selects the channels.
RETURN:
Alternates between the previously selected channel
and the current channel.
– CENTER +
2 3
MENU
TEST – REAR • L +
4 5 6
ENTER
– REAR • R +
8 9