Av Compu Link Remote Control System - JVC RX-7012VSL Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, following the diagrams below and the
procedure on the next page.
CONNECTIONS 1:
VCR
VHS
AV
COMPU LINK
CAUTION:
The AV COMPU LINK remote control system cannot control the DBS tuner connected to the
TV SOUND/DBS jacks.
Notes:
• When connecting only the VCR and DVD player to this receiver, connect it directly to the receiver
using cable with the monaural mini-plugs.
• You can only connect the TV with AV COMPU LINK EX to the AV COMPU LINK terminal.
• Refer also to the manuals supplied with your video components.
CONNECTIONS 2:
CASE1: If the components are equipped with the S-video
terminals
MONITOR
OUT
To Video input 1
DVD
OUT
(REC)
VCR
IN
(PLAY)
DBS
TV
VIDEO
CASE3: If only the VCR is equipped with the S-video
terminal
To Video input 2
MONITOR
OUT
To Video input 1
DVD
OUT
(REC)
VCR
IN
(PLAY)
DBS
TV
VIDEO
29
DVD player
AV
COMPU LINK
DVD
AV
COMPU LINK
DVD player
DVD
VCR
S-VHS
DO NOT use these video terminals.
DVD player
DVD
VCR
S-VHS
DO NOT use these video terminals.
TV
AV
COMPU LINK EX
AV COMPU LINK EX terminal
on the rear panel
CASE2: If the components are not equipped with the S-
video terminals
DVD player
DVD
VCR
VHS
DO NOT use these video terminals.
CASE4: If only the DVD player is equipped with the S-video
terminal
DVD player
DVD
VCR
VHS
DO NOT use these video terminals.
To Video input 2
MONITOR
OUT
DVD
OUT
(REC)
VCR
TV
IN
(PLAY)
DBS
VIDEO
To Video input 2
To Video input 1
MONITOR
OUT
DVD
OUT
(REC)
VCR
TV
IN
(PLAY)
DBS
VIDEO