Removing The Filter Unit; Removing The Ir (Back) Unit - Eiki EIP-5000L Service Manual

[12] Removing the Filter Unit

1. Disconnect all the connectors from the filter unit. Remove the four screws from the filter unit and then take it out.

[13] Removing the IR (Back) Unit

1. Disconnect all the connectors from the power channel. Remove the six screws from the Handle Bracket 2 and then take out the Handle Bracket 2.
2. Remove the screw from the IR (Back) unit and detach the IR (Back) unit.
3. Remove the four screws from the Direct off unit and then take it out.
Chassis
14-1
Handle Bracket 2
14-1
Insulator
PR3
PR2
PR1
Power Channel
Chassis
2 – 11
12-1
Filter Unit
IR (Back) Unit
14-2
14-1
Direct Off Unit
PR3
PR2
PR1
EIP-5000/5000L