Recommended Equipment - Lincoln Electric RANGER 250 GXT (AU) Operator's Manual

C-2
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit- (400 AMP Capacity) which
includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
K875 Accessory Kit- (150 AMP Capacity)
WIRE FEED
K449 LN-25 - Includes internal contactor for across
the arc operation (no control cable). Provides "cold"
electrode until gun trigger is pressed. Includes gas
solenoid.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
K126-2 Magnum 350 Innershield Gun
K1802-1 Magnum 300 MIG Gun (for LN-25)
K470-2 Magnum 300 MIG Gun (for LN-15)
K466-10 Connector Kit (for LN-15, K470-2)
K1500-1 Gun Receiver Bushing (for LN-15 & K126-2)
K1870-1 LN-15 Across the Arc Model
TIG
Magnum™ TIG Torch
K1783-4 - TIG Torch
Magnum Parts Kit and Argon Gas
K930-2 TIG Module - Provides high frequency and shield-
ing gas control.for AC and DC GTAW (TIG) welding applica-
tions. Its compact case is designed foe easy carrying, com-
plete with a handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-3 Control Cable, and
K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module, Provides a
"cold" electrode until the triggering device (Arc Start Switch)
is pressed.
K936-3 Control Cable - Connects TIG Module to Ranger®
250 GXT (AU).
ACCESSORIES
OPTIONAL TIG EQUIPMENT:
K939-1 Docking Kit - For Mounting the K930-2 TIG Module
on top of the Ranger® 250 GXT (AU).
K937-45 Control Cable Extension - Allows TIG Module to be
operated at distances up to 200ft. from the power source.
Available in 45ft. (13.7m).
K963-3 Hand Amptrol
K870 Foot Amptrol
REMOTE OUTPUT CONTROL
(See Operations Section for reference)
The Ranger® 250 GXT (AU) is equipped with a 6-pin con-
nector. The 6- pin connector is for connecting the K857 or
K857-1 Remote Control (optional) or for TIG welding, the
K870 Foot Amptrol or the K963-3 Hand Amptrol. When
remote control is used set the LOCAL / REMOTE switch in
the "REMOTE" position.
RANGER® 250 GXT (AU)
C-2