Step 6: Using Point And Select; Step 7: Interactive Setup; Step 8: Order Programming - RCA Digital Satellite Receiver User Manual

Setup and Connections
Step 6: Interactive Setup
If you installed your satellite dish antenna yourself, you may have
already used the interactive setup to find the dish pointing coordinates,
acquire and fine-tune the signal, and run a system test.
If you need to run the interactive setup again, select Options from the
Main menu, then select Interactive Setup.
If you just want to check your dish pointing coordinates or run the signal
strength meter, select Dish Pointing from the Main menu.
Step 7: Order Programming
After you have installed your DIRECTV PLUS™ System, you should
contact DIRECTV in order to receive DIRECTV
Programming with DIRECTV:
With this receiver and the proper satellite dish antenna, you may be able
to receive local channels from DIRECTV in certain areas. Additional
Equipment may be required in some areas. Check with your retailer or
visit www.directv.com for information on availability of local channels
from DIRECTV in your area.
16
®
programming.
Call 1-800-347-3288
When you or der programming, you need
to know your access car d number. To get
the number , select Options from the Main
menu, then System Options , and then
select System T est .
Wait for the system to r un all of its tests.
The access car d number is displayed at
the end of the system test.
Write the access car d number in the space
below for easy r eference:
___________________________________