The Point And Select Method; Programming The Remote Control - RCA DRD223RD User Manual

Using the Remote

The Point and Select Method

Point and Select is the two-step method you use to navigate through the
menu system and program guides. Once you know how to point and
select, you can explore the on-line menus.
1. Point
You point by pressing the arrow keys on the remote. Pressing the
arrow keys moves the on-screen highlight to different items in the
program guide and the menu screens. Pressing an arrow once moves
the highlight one space in the direction of the arrow.
For example, to point down (that is, to move the highlight toward
the bottom of the screen), press the down arrow. To point right,
press the right arrow.
2. Select
Once you have pointed to an item on the screen, select it by
pressing the OK button on the remote. Selecting an item tells the
menu system to go ahead and make the change you have indicated.
For example, the instructions in the User's Manual might tell you to
Point to the Back button and press OK.

Programming the Remote Control

The satellite system's remote can be programmed to control most brands
of remote controllable TVs. The remote is programmed to control most
RCA, GE and P S
RO CAN
control other manufacturers' brands.
Testing the Remote
To determine whether the universal remote needs to be programmed,
turn a device on, such as a VCR, point the remote at the VCR, and press
the VCR button. Then press POWER or CH ^ (channel up) or CH v
(channel down) to see if the VCR responds to the remote commands. If
not, the remote needs to be programmed.
There are two ways to program the remote: automatic or direct entry.
18
TVs. The remote needs to be programmed to
Don't worry about getting stuck inside a
menu. Pressing the CLEAR button on the
remote takes you out of the menu system
and back to the program you were
watching.