Carrier CAPRI-280 Operation And Service Manual page 24

ALARM TITLE
NO
25 Motor Failure
26 Not used
31 Maintenance Alarm 1
32 Maintenance Alarm 2
99 Alarm Queue Full
T-283
Table 3-2. Alarm Codes (Continued)
CAUSE
A motor has not reached
full operating speed or
the condenser motors
have shut down due to a
pressure alarm or the
motor fuse has blown.
The compressor hour
meter is greater than the
value in Maintenance
Hour Meter 1.
The evaporator hour
meter is greater than the
value in Maintenance
Hour Meter 2.
All locations of the alarm
queue are currently full
and no more alarms can
be saved.
3-3
REMEDY
Replace motor, or cor- Alarm displayed and the
rect pressure shutdown. motor fail output is ener-
gized.
Reset the maintenance Alarm will be generated.
hour meter.
Reset the maintenance Alarm will be generated.
hour meter.
Record and clear alarm Alarm will be generated.
queue.
CONTROLLER
RESPONSE