Disassembly Of Loading Motor P.c.b; Disassembly Of Drive Gear (A) & Drive Gear (B); Disassembly Of Magnet Holder, Washer, Magnet; Clamper - Panasonic SA-PT750PL Service Manual

SA-PT750PL
10.30. Disassembly of Loading Motor
P.C.B.
• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 3) of Item 10.4.
• • • • Follow (Step 1) to (Step 4) of Item 10.5.
• • • • Follow (Step 1) to (Step 4) of Item 10.7.
• • • • Follow (Step 1) to (Step 4) of Item 10.8.
Step 1 Remove 2 screws from Loading Motor P.C.B.
Step 2 Remove Loading Motor P.C.B. from the mechanism
base assembly.
10.31. Disassembly of Drive Gear (A)
& Drive Gear (B)
• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 3) of Item 10.4.
• • • • Follow (Step 1) to (Step 4) of Item 10.5.
• • • • Follow (Step 1) to (Step 4) of Item 10.7.
• • • • Follow (Step 1) to (Step 4) of Item 10.8.
Step 1 Release the claws in the direction of arrow (1), and then
pull up the drive shaft.
Step 2 Remove the drive gear (A) and drive gear (B) from the
mechanism base assembly .
10.32. Disassembly of Magnet
Holder, Washer, Magnet &

Clamper

• • • • Follow (Step 1) to (Step 3) of Item 10.3.
• • • • Follow (Step 1) to (Step 3) of Item 10.4.
• • • • Follow (Step 1) to (Step 4) of Item 10.5.
• • • • Follow (Step 1) to (Step 4) of Item 10.7.
• • • • Follow (Step 1) to (Step 4) of Item 10.8.
• • • • Follow (Step 1) to (Step 3) of Item 10.28.
Step 1 Flip the mecha base to show the reverse side of the
clamp plate.
64