Using The Input Button - ProScan HDTV User Manual

BASIC TV OPERATION

USING THE INPUT BUTTON

1. Repeatedly press the INPUT button to scroll through the available input sources
until you find the input associated with the component (such as VCR or DVD
player) you want to view.
Input source
Watch the channel banner to see the input sources change with
each press of the INPUT button.
2. Once you have found the input source you want, stop pressing INPUT.
• If you tune to VID1 and your VCR is connected to that input, you will be
able to view your VCR. To play, stop, or rewind the VCR1 tape using the
remote that came with your TV, you must first press the VCR1 button to put
the remote control in VCR mode.
There are other ways of selecting an input channel:
• Program the component (VCR, DVD, etc.) buttons on the remote control to
automatically tune to the correct input channel when pressed. See the section
in this book, "System Options and Preferences" for information on auto tuning.
• After pressing INPUT on the remote, enter the digits 1, 2, 3, 4, or 5 to tune to
(S)VID1, 2, 3, FRONT, or CMPNT, respectively.
• After pressing INPUT on the remote, press GUIDE on the remote control to
view a guide-like list of your line inputs and corresponding channels.
30
ON•OFF
VCR1
DVD VCR2 AUX
MUTE
+
CH
CH
FETCH
GUIDE
OK
MENU
1 2 3
4 5 6
7 8 9
INPUT ANTENNA
INPUT button
0
REVERSE PLAY FORWARD
RECORD STOP
PIP SWAP CH CTRL WHO
TV
DIRECTV
SKIP
GO BACK
INFO
CLEAR
PAUSE