Changing Channels - ProScan HDTV User Manual

BASIC TV OPERATION

CHANGING CHANNELS

To change channels by entering numbers with the remote control, the remote needs to
be in the correct "mode": either DIRECTV mode (if you subscribe to DIRECTV) or TV
mode.
When you want to watch DIRECTV
programming, put the remote in DIRECTV
mode
1. Make sure the TV is in DIRECTV mode by pressing DIRECTV
on the remote control.
2. Enter the channel number and press OK. If you do not enter at
least three digits, "???" will appear in the channel entry box,
and the system will wait for a valid entry.
When you want to watch a digital or analog TV
channel, put the remote in TV mode
If you want to watch a digital channel:
1. Make sure the TV is in TV mode by pressing TV on the remote
control.
2. Enter the primary channel number. This number will appear in
the primary channel entry box. If there is no subchannel,
press OK.
3. If the primary channel number has fewer than three digits and
you want to enter subchannel numbers, press the right arrow
to advance to the subchannel entry box.
4. Enter the number of the subchannel. This number will appear
in the subchannel entry box.
5. Press OK on the remote control to tune to the channel.
If you want to watch an analog channel:
1. Make sure the TV is in TV mode by pressing TV on the remote
control.
2. Enter the channel number. This number will appear in the
primary channel entry box. (Analog channels don't have
subchannels.)
3. Press OK on the remote control to tune to the channel.
®
ON•OFF
VCR1
DVD VCR2 AUX
MUTE
+
CH
Channel entry box Highlighted to indicate
DIRECTV mode
ON•OFF
VCR1
DVD VCR2 AUX DIRECTV
MUTE SKIP
+
CH
Subchannel Highlighted to indicate
entry box TV mode
Primary channel
entry box
Note that you can always
use the channel up and
down buttons on the
remote control to change
channels within the
DIRECTV and TV modes.
TV
DIRECTV
DIRECTV
SKIP
button
TV
TV
button
27