Accessory Information - ProScan HDTV User Manual

Reference

ACCESSORY INFORMATION

The following accessories are available from most dealers
and electronics supply stores in case you want to position
your components farther apart or need additional cables.
Standard Audio/Video cable with
RCA-type phono plugs. VH83
Monaural VCR Dubbing Audio/
Video Cable is a double cable that
lets you connect the video and audio
jacks of two VHS VCRs to duplicate
tapes. It can also be used to connect
a VCR to your TV. The cable is
color-coded and shielded. It has
RCA-type phono plugs on each end.
Gold-Tipped cable, VH83 (6-ft)
Stereo VCR Dubbing Audio/Video
Cable is a triple cable that lets you
connect the
stereo components. Gold-Tipped
cable, VH84 (6-ft)
Push-on Cable* attaches to the
round antenna connectors (called
75-ohm F-type) on the back of your
VCR or TV. The ends push on for a
quick connection. VH89 (6-ft)
* This accessory is intended for use with an off-air or cable TV signal distribution and is not suitable for distribution
of the satellite signal originating from your satellite dish antenna.
86
and jacks of
VIDEO AUDIO
Screw-on Cable* attaches to the
round antenna connectors (called
75-ohm F-type) on the back of your
VCR or TV. The ends screw onto the
connectors for a secure connection.
VH82 (6-ft), VH81 (3-ft)
S-Video Cable has multi-pin
connectors on each end for
connecting S-Video components to
your TV. VH976 (6-ft), VH913 (12-ft)
RG-6 Coaxial Burial Cable with
weatherproof "F" connectors. D905
Optical/SPDIF cables help you
connect to a component with an
Optical Audio In jack, such as a
Dolby Digital decoder or receiver.
DV3 (3-ft), DV6 (6-ft)