Minolta MACRO TWIN FLASH 2400 Instruction Manual page 34

CARE AND STORAGE
Temperature
• This product may be used over a temperature range of –20°C to
50°C.
• Do not leave this product exposed extremely high temperatures
(eg. direct sunlight inside motor vehicles), or in conditions of high
humidity.
• To prevent condensation from forming, place the product in a
sealed plastic bag when bringing it from cold environment to a
warm environment. Allow it to come to room temperature before
removing it from the bag.
• Battery capacity decreases at colder temperatures. Keep your
flash and spare batteries in a warm inside pocket when shooting
in cold weather. The lamp may glow even when there is
some power left in the batteries in cold weather. Batteries will
regain some of their capacity when warmed to normal operating
temperature.
• This product is not waterproof. Care is therefore required to
ensure that it does not come into contact with water or sand when
used near water. Contact with water, sand, dust, or salt content
may result in a malfunction.
66
Maintenance
• Clean by wiping with a soft, clean cloth. If the product has been in
contact with sand, wiping will damage the surface, and it should
therefore be cleaned gently using a blower.
• Do not use cleaners containing organic solvents (eg. thinners or
benzene) under any circumstances.
Questions and Service
• If you have questions about this product, contact your local cam-
era dealer or write to the Minolta distributor in your area.
• Before shipping your product, please contact an authorized
Minolta Service Facility for details.
67