Minolta MACRO TWIN FLASH 2400 Instruction Manual page 3

FOR PROPER AND SAFE USE
WARNING
• Do not disassemble this product. Electric shock may cause injury
if a high voltage circuit inside the product is touched. Take the
product to a Minolta Service Facility when repairs are required.
• Immediately remove the batteries and discontinue use if the flash
or the controller is dropped or subjected to an impact in which the
interior, especially the flash unit, is exposed. The flash has a high
voltage circuit which may cause an electric shock resulting in
injury. The continued use of a damaged product or part may cause
injuries.
• Keep batteries or small parts that could be swallowed away from
infants. Contact a doctor immediately if an object is swallowed.
• Store this product out of reach of children. Be careful when
around children, not to harm them with the product or parts.
• Do not fire the flash directly into the eyes. It may damage eye-
sight. When taking close-ups of the facial area, subject's eyes
should be protected.
• Do not fire the flash at vehicle operators. It may cause a distrac-
tion or temporary blindness which may lead to an accident.
• Do not use the product near inflammable gases or liquids such as
gasoline, benzine, or paint thinner. Do not use inflammable prod-
ucts such as alcohol, benzine, or paint thinner to clean the prod-
uct. The use of inflammable cleaners and solvents may cause an
explosion or fire.
• If the product emits a strange odor, heat, or smoke, discontinue
use. Immediately remove the batteries taking care not to burn
yourself, as batteries become hot with use. The continued use of a
damaged product or part may cause injuries.
• Take the product to a Minolta Service Facility when repairs are
required.
4
CAUTION
• Do not use or store the product in a hot or humid environment
such as the glove compartment or trunk of a car. It may damage
the product and batteries which may result in burns or injuries
caused by heat, fire, explosion, or leaking battery fluid.
• If batteries are leaking, discontinue use of the product.
• Do not fire the flash while it is in contact with people or objects.
The flash unit discharges a large amount of energy which may
cause burns.
• Burns may result if the batteries are removed immediately after
prolonged or heavy flash use. Wait for the batteries to cool.
5