Custom Functions - Minolta MACRO TWIN FLASH 2400 Instruction Manual

CUSTOM FUNCTIONS

The following four flash settings may be custimized:
• Auto power off period (4, 15, 60 minutes or canceled)
• Focus-lamp illumination period (8 seconds/ No limit)
• Exposure modes in which manual flash may be set (M mode/ all
modes)
• Manual-flash power-level steps (1EV increments / 1/2EV increments)
1. Press the flash on/off button
for 3 seconds until the three
lamps glow at the same time:
auto lamp, flash-on lamp,
flash-off lamp.
• The setting for the first item "Auto
power off" can now be selected.
2. Press the A-B/Lamp button to
select the item, and the
TTL/M/Test button to select the
desired setting.
• Each time the A-B / lamp button is
pressed, the four items appear in the
order listed at the top of this page.
• Each time the TTL/M/Test button is
pressed, the items appear in the
order shown horizontally on the next
page.
52
Select using the TTL/M/Test button
1. Auto power off period
4 minutes 15 minutes 60 minutes
2. Focus-lamp illumination period
4 minutes No time limit
3. Exposure modes in which manual flash may be set
M mode only All modes
4. Manual-flash power-level
1EV steps 1/2 EV steps
Canceled
Continued on next page
53