NOTE: Refer to Fig. 14.
1. Remove the engine from the cart. See page 23.
2. Pull the plastic caps (B) off the wire screws (98) in
both places on the field. Loosen the screws and re-
lease the wires (96).
12
2
6
Fig. 14
Field and Wiring Harness
96
B
98
3. Loosen the four setscrews (12) holding the field (6)
to the clutch housing (2).
4. Pull off the field.
5. Skip ahead to Reassembly, page 26, Step 4 or con-
tinue on page 25.
0046