Getting Started - Prestigio MultiPad 8.0 HD User Manual

2. Getting Started

2.1 Charging the battery
Prestigio MultiPad comes with a built-in lithium-Ion rechargeable battery and is designed to use
only manufacture-specified original batteries and accessories. You can see battery status on status bar of
MultiPad in the lower right corner of the home screen. Android OS has battery charge detection system
and notify user if battery charge is low and device need to be connected to AC adapter. If you will see
such message, or your device couldn't power on, connect original AC power adapter to charge your
device. Insert the connector of adaptor to the DC port on the device and connect the power adapter to
the wall socket for charging.
Normally it takes approximately 5.5 hours to fully charge the device. Operating the device while charging
with the AC adapter may extend the time of full charging.
Please, fully charge your new device after unpacking.
[Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the
respective security precautions.
The device cannot be charged via USB
Please be informed, that Li-Ion battery is considered to be a consumable part of your MultiPad, it's rated
capacity might fall up to 50% during first two years from the date of purchase; such reduction of capacity
is not a defect and is not covered with warranty.
2.2 Using the storage card
Your new Prestigio MultiPad 8.0 HD (PMP5588C_DUO) Tablet PC is equipped with Micro SD card
slot to extend available device memory. It is compatible with Micro SD/ Micro SDHC card formats of size
up to 32Gb.Proper functioning of larger capacity cards is not guaranteed.
Insert a Micro SD/SDHC cards:
The device supports micro SD/SDHC cards.

To insert a Micro SD card, place the card connector towards the rear side of the device and the printing

side of the card towards the front side of the device.
To remove the micro SD card, gently press the edge of the card to release the safety lock and pull the

card out of the slot.
To access the files on the memory card, select Fire Browser icon and tap on SD Card.

USER MANUAL | MultiPad 8.0 HD (PMP5588C_DUO)
2
7