time out
TOT? 12
transmission
SCANS?13
type of scanning
voice function
VOICE?14
activation
DIFFR? 15
shift repeater
C-CDC? 16
ctcss/dcs rx/tx
R-CDC? 17
ctcss/dcs only rx
T-CDC? 18
ctcss/dcs only rx
S-d? 19
+ / - shift
frequency step
STEP? 20
selection
wide/narrow band
N/W ? 21
selection
VFO/MR
Exit
Note: parts from 16 to 21 are available only in Frequency mode.
In Channel mode only parts from 1 to 15 are active.
To pass rapidly from Frequency to Channel mode or vice versa, switch on the unit
and hold down the
button.
NAME
ON/OFF
16
OFF-270
SAME AS ABOVE
Turn encoder to select Press
TO/CO/SE
Press twice
Turn encoder to select
ON/OFF
Press
Press
Input frequency or turn encoder
0-70.995
Press
Press
See CTCSS chart
SAME AS ABOVE
Turn Encoder to select
See CTCSS chart
Press
See CTCSS chart
SAME AS ABOVE
Turn encoder to select
+/-/cancel
Press
Press
5k/10k/6.25k/
SAME AS ABOVE
12.5k/25k
Wide
SAME AS ABOVE
Narrow
Turn encoder to select
Press
to confirm
Press
to exit
to confirm
to exit
to confirm
to exit
to confirm
to exit
to confirm
to confirm
to exit