Midland CT210 Owner's Manual page 30

Delete a memory
1.Delete one stored channel
In Mode turn off the power.
Hold down the key and turn on the unit. "DEL?"
and the stored channel number will be displayed. Turn
the Encoder knob or select the channel to delete. Push
until "YES?" appears on the display; push it again to
confirm.
2. Reset (Delete all the settings in Frequency mode)
Hold down the button and turn on the unit until
"RESET?" is displayed. Press
on the display; push it again for confirmation.
3. Delete all settings
Hold down and turn on the unit until "VFO?" is shown
on the display. Turn the Encoder knob to select "FULL?",
then press to delete all the settings in Frequency and
VFO modes.
until "VFO?" is shown
9