Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Swann IP3G1000
Summary of Contents for Swann IP3G1000
- Page 1 MPEG4/MJPEG Network Camera Quick Installation Guide...
-
Page 2: Getting Started
Getting Started Package Contents Check the items contained in the package carefully. You should have the following items. Once any item contained is damaged or missing, contact the authorized dealer of your locale. One MPEG4/MJPEG Network Camera. One AC Power Adapter. One External Antenna (for wireless model). -
Page 3: Installing The Camera Stand
Setting Up the Camera Installing the Camera Stand The camera comes with a camera stand, which uses a swivel ball screw head to lock to the camera’s screw hole. When the camera stand is attached, you can place the camera anywhere by mounting the camera through the three screw holes located in the base of the camera stand. -
Page 4: Connecting The Camera To Lan
Connecting the Camera to LAN Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you connect the AC power adapter, the camera is powered on automatically. You can verify the power status from the Power LED on the front panel of the camera. - Page 5 Connecting the Camera to WLAN If you use a wireless network in your application environment, you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with “default” SSID. Connecting the External Antenna NOTE...
-
Page 6: Accessing The Camera
Accessing the Camera Using IP Finder 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. 2. Click the IP Finder item to launch the utility. The control panel will appear as below. Display the connected camera(s) Click Search to find the IP address of the connected camera(s). -
Page 7: Accessing To The Camera
Accessing to the Camera 1. Open the Web browser on your computer (for example, Microsoft Internet Explorer in this guide) 2. Type the default IP address (192.168.0.30) or the IP address found by IP Finder in the Address bar, and then press [Enter]. 3. - Page 8 4. Click Setup and then Smart Wizard to set up your camera quickly. The Smart Wizard will guide you through the necessary settings with detailed instructions on each step. - 7 -...
- Page 9 Tips For more information, please refer to the Advanced Installation Guide on the provided Installation CD-ROM. For details of operating Ultra View, please refer to the Software User Guide on the provided Installation CD-ROM. If you have any problem on the product(s), please contact your local authorized dealer.
Need help?
Do you have a question about the IP3G1000 and is the answer not in the manual?
Questions and answers