Recording Gas Parameters; Check The System Equipment Level - Buderus Logano plus GB312 Installation And Maintenance Instructions Manual

6.2

Recording gas parameters

Check the gas parameters (Wobbe index and calorific
value) with the relevant gas supply utility and enter them
in the commissioning report (
6.3

Check the system equipment level

In its delivered condition, the burner is set up to be
operated with natural gas H or L.
Country:
AT, BA, BE, BG, BY,
CH, CN, CZ, DE, DK,
EE, ES, FR, GB, GR,
HR, HU, IE, IT, LU, LT,
LV, NO, PL, PT, RO,
RU, SE, SI, SK, UA
DE
NL
Tab. 14 Factory settings
Logano plus GB312 - Subject to technical modifications.
Chapter 6.23).
Gas type Factory settings
Natural gas H or E Factory-set ready for use.
(G20) The gas train is adjusted and sealed.
Wobbe index for 15 °C, 1013 mbar:
• Adjusted to 14.1 kWh/m
• Applicable for 11.4 to 15.2 kWh/m
Wobbe index for 0 °C, 1013 mbar:
• Adjusted to 14.9 kWh/m
• Applicable for 12.0 to 16.1 kWh/m
Natural gas L Factory-set ready for use.
The gas train is adjusted and sealed.
Wobbe index for 15 °C, 1013 mbar:
• Adjusted to 12.1 kWh/m
• Applicable for 11.4 to 12.4 kWh/m
Wobbe index for 0 °C, 1013 mbar:
• Adjusted to 12.8 kWh/m
• Applicable for 12.0 to 13.1 kWh/m
Natural gas L (G25) Factory-set ready for use.
The gas train is adjusted and sealed.
Wobbe index for 15 °C, 1013 mbar:
• Adjusted to 11.5 kWh/m
• Applicable for 10.85 to 12.4 kWh/m
Wobbe index for 0 °C, 1013 mbar:
• Adjusted to 12.2 kWh/m
• Applicable for 10.6 to 13.8 kWh/m
Only use the burner with the correct gas
nozzles.
B Check with the relevant gas supply utility which gas
type is supplied.
B Check whether the actual gas type is the same as that
stated on the type plate.
3
3
3
3
3
3
Commissioning
3
3
3
3
3
3
6
29