Connecting To The Dd35 Control Panel - Philips RSAT 2 Customer's Manual

3. Installation and Startup
3.4

CONNECTING TO THE DD35 CONTROL PANEL

REMOTE RS 422
PORT 1 J2A J2A PORT 3
J1
Ω
REMOTE 50 PORT 2 J2B PORT 4
Re
RS-422
Ports
RS-422 Cable
(Option)
Fig. 8: Power and control connectors
PE
10
Attention:
The EMC regulations require the use of properly shielded cables in the instal-
lation of the device or the system. Suitable cables can be ordered from
Philips Broadcast.
RS 232 INTERFACE
J3A PORT 1 J4A GPI/GPO J5A
WIPE SELECTION
J3B PORT 2 J4B MODEM J5B
J6
The panel have a PE terminal as protective earth on rear.
Part of the DD35
control panel rear
CONTROL PANEL
AUX SELECTION
J7
Protective Earth
Befor mounting the Satellite
Panel, switch to ON
Operating Instructions - Rev. 1 / 11.2001
Remote Control Panel RSAT2
Fuses AC IN