Emblem, Decals - Ricoh B205 Service Manual

Emblem, Decals

[C]
[A]
[B]
1. Attach the emblem [A] and panel [B] to the front door [C].
NOTE: Push the panel in until the emblem and panel move into their positions.
You will hear a click.
2. Pull the paper tray out and turn the paper size dial to select the appropriate size.
Adjust the side guides and end guide to match the paper size.
NOTE: To move the side guides, first pull out the tray fully, then push down the
green lock at the rear of the tray.
3. Attach the appropriate paper tray number decal [D] to each paper tray.
NOTE: Paper tray number decals are also used for the optional paper tray or
the optional LCT. Keep any remaining decals for use with these
optional units.
SM
INSTALLATION REQUIREMENTS
[D]
1-13 B205/B209/D007/D008