Standard Equipment - JEI MAGBEAST HM40 Operation & Safety Manual

JEI SOLUTIONS LTD
18) In the case that the machine falls on a hard surface, from a height, is wet or is
subjected to other unfortunate events that could affect its technical state - work
should be terminated immediately and the machine should be sent to service for
inspection as soon as possible.
Caution should be taken when machining plates with thickness lower
than 10 mm (0.4'') because adhesion force depends on material thickness
and is significantly lower for thin plates. The whole surface of machine base
must stick to working material. Before every positioning, wipe working
surface with coarse-grained sandpaper.

3. STANDARD EQUIPMENT

MAGBEAST HM40 comes in a standard equipment set which consists of:
metal box
drilling machine
cooling system
2.5 Allen Key
3 Allen Key
4 Allen Key
8 mm flat wrench
spoke handles
safety chain with snap hook
operator's manual
plastic box
5.2 (20130122)
Please keep all recommendations.
Operators manual for Drilling Machine Magbeast HM40
MAGBEAST HM40
- 1 pc
- 1 pc
- 1 pc
- 1 pc
- 1 pc
- 1 pc
- 1 pc
- 3 pcs
- 1 pc
- 1 pc
- 1 pc
- 6 -