refrigerator overview
control panel
1
led panel indications
Display is on
Display is off
The AUTO indication
dot is lit.
The AUTO and LP
indication dots are lit.
The AUTO indication
dot is lit. LP indication dot
flashes slowly.
The LP indication
dot is lit.
Digits
e.g.
Message indications:
"60" is
displayed.
"LP" is flashing (The message
alternates between "LP"
and the temperature.)
2
3
4
1.
ON/OFF
button (main power)
Press the button to turn the refrigerator ON or OFF.
2.
AUTO/GAS
mode selector button
Press the button to turn the AUTO mode ON or OFF.
3.
TemP. SeT button
The thermostat has 5 settings where 1 indicates the warm-
est and 5 the coldest temperature setting. Press the button
repeatedly until the desired setting, e.g. 3, is shown in the
LED display. This value is shown for about 5 seconds and
then the temperature is displayed once again.
status information
Refrigerator on
Refrigerator off
AUTO mode and
AC operation
AUTO mode and
GAS operation
Temporary gas lockout function. Only in AUTO mode. It pre-
vents gas operation when stopping at a refueling station.
Manual GAS operation mode.
Fresh food temperature.
Thermostat range setting indication (1 - 5). Temporary during
setting. The thermostat settings are stored automatically after
5 sec. of inactivity.
Temperature is above
measurement range
Gas operation lock out.
(Check gas.)
- 15 -