Protecting Against Unauthorised Access; Resetting The Base To The Default Settings - Gigaset SL400A Manuals

•
Protecting against
unauthorised access
Protect the base system settings with a PIN
known only to you. The system PIN must be
entered when, for example, registering/
deregistering a handset to/from the base or
when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set on
the base (default setting: 0000) to a 4-digit
PIN known only to you.
Gigaset SL400A: Setting a system PIN facili-
tates remote operation of the answering
¢
machine ( page 58).
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN and
§OK§
press
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN is set to 0000.
Please note
All handsets are deregistered and must
be re-registered. All settings are reset to
the default settings.
¢
System PIN
§OK§
.
.
•
Resetting the base to the
default settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered
u
Eco Mode is activated and Eco Mode+ is
deactivated,
u
The system PIN is not reset.
Ï
¢ ¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
Setting the base
¢
Base Reset
.
77