Setting The Date And Time - Gigaset SL400A Manuals

First steps

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Please note
Depending on your network provider, the date and time may be displayed auto-
matically.
Date:
01.03.2011
Time:
00:00
Back
¤
Enter the hours and minutes as four
digit numbers via the keypad,
e.g., QM 5 for 07:15 am.
Change the input position with the
control key if necessary.
18
Calls Time
Date/Time
Save
¤
Press the key below
play screen to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢
page 30.)
The Date/Time submenu is shown on the
display.
¤
The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., Q4Q4
2Q for 04/04/2011.
Press the right or left control key
to change the input position and
correct an entry.
¤
Press down on the control key to switch
to the time input field.
§Time§
on the dis-
Date/Time
Date:
04.04.2011
Time:
00:00
Back Save